Tests for total petroleum hydrocarbons (TPH) in crude oils, fuel oils, waste oils, creosote, coal tars, bitumen and many other petroleum contaminants with heavy PAH compounds. Ideal for:

• Produced water optimization
• Storm water monitoring
• Waste water
• Clean water verification
• Test of oil in water
• Oil in soil on-site

Low cost, accurate and user friendly OIW/OIS analyzer

• 1:1 replacement of TD-500D
• Repeatable oil in water and oil in soil analyzer 
• Known as the “industrial standard” oil in water analyzer on the market 

More info: https://uvf-500d.com/product/uvf-500d/ 

• Minicell Borosilicate Glass Cuvettes (70-250 µl) 400 ea. Replacement disposable cuvettes for p/n 50954.
• Typical used for crude oil and all extraction solvents.
• Can be used both with the UVF-500D/TD-500D

• The Minicell Adaptor Kit includes Minicell Adaptor (p/n 103012) and 400 disposable Minicell glass cuvettes (p/n 50952).

• Typical used in the UVF-500D/TD-500D for crude oil.

• Pack of 400 each, includes plug caps to prevent spills.

• Samples can be stored for a limited time in this improved version of the cuvettes

• For use with UVF-500D/TD-500D for all oil in water applications.  Same cuvettes included in test kits.

• Includes 8mm Cuvette Adaptor and 400 8mm Glass Cuvettes each

• For solvent extraction method.

• For UVF-500D/TD-500D.

• For no-solvent extraction method.

• For UVF-500D/TD-500D.

• Minicell Adaptor Only, slotted.

• For UVF-500D/TD-500D.

• Used to calibrate or check instrument performance without preparing any liquid standards.

• Can be adjusted to the required reading to always have a reference point for the instrument.

• Works on both Channel A or B.

• Easy setup and tuning for accurate instrument calibration check.

• Includes case with two hex wrenches to adjust and fine tune readings to match your standard or sample’s response.

• Functions similar to Sitelab’s TPH Solid Standard, can be used for both UVF-500D/TD-500D.

• 0.5L bottle of surfactant.

•  For UVF-500D/TD-500D.

• Bag of 100 pcs.

• To be used with No-Solvent OIW.

• Surfactant and Disposable Syringe.

• For UVF-500D/TD-500D.

• Used for oil in water analysis, including clean, less oily water.

• Box contains laboratory supplies for 60 samples.

• Use with hexane (solvent not included).

• Includes the main parts needed to operate a UVF-500D.

• All parts expertly selected through years of field experience.

• Includes watertight carrying case with space for main unit and TPH 100ppm Solid Standard.

• Main unit not included in this kit.